Products+
100Gbps Single Mode 10KM QSFP28 Compatible Transceiver
100Gbps Single Mode 10KM QSFP28 Transceiver, fully tested compatible for over 100 vendors.
Features
- Hot-pluggable QSFP28 form factor
- Supports 103.1Gb/saggregate bit rates
- Maximum link length of 10km on Single Mode Fiber (SMF)
- Powerdissipation < 3.5W
- Built-indigital diagnostic functions
- Built-inCDR
- 4x278Gb/s DFB-based LAN-WDM transmitter
- Duplex LC receptacles
- Single3V power supply
- RoHScompliant
- Operatingcase temperature: 0~+70°C
Description
The 100Gb/s QSFP28 LR4 transceiver is compliant with the QSFP28 MSA and IEEE 802.3ba. QSFP28 LR4 transceiver modules are designed for use in 100 Gigabit Ethernet interfaces over single mode fiber.
Absolute Maximum Ratings(TC=25°C, UNLESS OTHERWISE NOTED)
Module performance is not guaranteed beyond the operating range.
Exceeding the limits below may damage the transceiver module permanently.
|
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
Notes |
|
Storage Temperature |
Ts |
-40 |
- |
+85 |
ºC |
|
|
Maximum Supply Voltage |
Vcc |
-0.3 |
- |
3.6 |
V |
|
|
Operating Relative Humidity |
RH |
15 |
- |
+85 |
% |
Recommended Operating Conditions
|
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
Notes |
|
Data Rate |
DR |
25.78±100ppm |
Gb/s |
1 |
||
|
Bit Error Rate-25.78Gb/s |
BER |
|
|
1E-12 |
|
2 |
|
Operating Case Temperature |
Tcase |
0 |
|
70 |
ºC |
|
|
Fiber Length on SMF |
L |
|
|
10 |
km |
|
Notes:
- Supports 100GBASE-LR4per IEEE 3ba.
- Testedwith a 231 – 1 PRBS.
Ordering information
|
Part Number |
Description |
|
BT-QSFP28-LR4 |
100Gbps QSFP28 LAN WDM4, LC, 10km, 0°C~+70°C, with DDM |
